The signaling ramp: the essential accessory for successful light signalling.

The use of a signalling ramp is frequently used by the Police, the Emergency Services and the Fire Brigade. However, other trades may have recourse to this type of device, such as construction site workers, road and rail workers, in order to signal the presence of work or accidents on the tracks. The signalling ramp can be attached to the roof of a vehicle by means of a system of adapted screws or can also be attached with magnetic feet to modify its location and deploy it if necessary to signal the passage of priority general interest vehicles or a dangerous intervention zone.

The various signal ramps and their approvals.

Signal ramps, equipped with LEDs, are available in different sizes and intensities. The smallest of the range is 34cm long and is equipped with a total of 6 LED lights: 2 at the front, 2 at the rear and one on each side of the product. The largest one is 1.67 metres long and has 26 lights: 12 at the front, 12 at the rear and one on each side. The lights of these signal ramps all have a minimum of 9 LEDs and up to 18 in the case of two-colour lights, thus ensuring successful light signalling and a very powerful and scattered diffusion of light of up to 360° with the aim of alerting all users near professionals or close to an intervention zone.

All the signalling ramps offered on our site comply with European legislation and standards relating to lighting and signalling ECE R65, which came into force on 1 March 2009. These signaling ramps, emitting blue light signals are categorized in class 2, allowing the use of this device by emergency vehicles such as the Police, the Fire Brigade or the SAMU and other vehicles with government authorization.

Safety and visibility are at the heart of our business.

Vehicle light signalling is an indispensable device for a large amount of professionals during their interventions. This is why this signalling must be perfectly adapted and efficient under all conditions. The proposed signaling ramps, all ECE R65 class 1 or class 2 approved, depending on the colour and intensity of the lights, have very high intensity and high performance led lights, arranged to create a 360° lighting spread. All the ramps offered also have various operating modes and different degrees of light intensity to adapt to the time of day and the ambient brightness: day mode and night mode. The signalling ramps are very resistant and have an aluminium structure that protects the lights and the electrical system from shocks, vibrations, water and dust, with an IP54 degree of protection. The lens and lens cap of the beacons structuring the ramp are made of highly resistant polycarbonate and completely sealed, protecting the internal components from the risk of malfunction with a protection class of IP67.

Purchase the ideal signalling ramp on Proteclight

The Proteclight team offers you a wide range of signalling ramps, of different sizes and intensities, from 34cm to 1.67 metres. All equipped with adjustable feet, these light devices are also available with a magnetic foot system, allowing you to deploy your ramp only when needed without having to screw it on the roof of your intervention vehicle.

Find the signalling ramp adapted to the situation and to your vehicle light signalling needs on Proteclight.